|
The E-10A and E-20B are telephone line powered speaker phones designed to provide two-way handsfree communication. Both function identically, but are available in two different housings to better suit the application. When the Call button is pressed, the E-10A or E-20B will come off-hook and will remain off-hook until a CPC signal is detected, the programmed timeout has elapsed, a busy signal is detected, or the call goes silent, making the unit automatically disconnect.
-
-The E-10A/20B can be connected directly to a C.O. line or analog PABX/KSU station when programmed as a ring down circuit, or used with a Viking Hot-Line Dialer. If a line or station is not available, Vikings DLE-200B ring down circuit can be used. One, or up to four, E-10A/20B speaker phones can share an existing phone line in a house or small business when used with a Viking C-200 or C-2000A (respectively) Entry Phone Controllers.
-
-For outdoor or harsh environments, the E-10A/20B are available with Enhanced Weather Protection (EWP). The E-10A-EWP and E-20B-EWP feature rubber gaskets and boots, closed cell foam gasketing, hand soldered silicon sealed connections, anti-corrosive gel filled tip and ring connectors, as well as urethane encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches.
-
-
-
-Applications
-Commercial, industrial and residential door security
-Door or gate communication
-Business delivery entrances
-Use in conjunction with a Viking K-1900-5 Dialer on C.O. lines or analog PABX/KSU stations
-Use on any programmed ring down circuit of an analog PABX/KSU station
-
-Features
-Alternate action call button to place or cancel a call
-Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
-Telephone line powered
-Weather resistant features: Mylar speaker, gaskets, internally sealed push button switch, UV stable exterior, enamel coated PCB
-Optional Enhanced Weather Protection (EWP) available for greater weather resistance
-Adjustable microphone and speaker volume
-Programmable maximum call length
-Selectable auto-answer feature allows remote monitoring
-Two way handsfree communication
-Programmable VOX (mic/speaker) switching speed
-E-10A/E-10A-EWP Features:
- Vandal resistant, black powder painted, aluminum face plate with heavy duty metal call button and mounting gasket
- Flush mountable using included plastic rough-in box part # 259576
- Surface mountable with an optional VE-5x5
-
-E-20B/E-20B-EWP Features:
- Light gray colored, impact resistant, U.V. stable, plastic chassis
- Surface mountable only
-
-Specifications
-Power: Telephone line powered (18 VDC/20mA minimum)
-E-10 Dimensions: Overall: 127mm x 127mm x 57.2mm (5 in x 5 in x 2.25 in), Rough-in box: 102mm x 102mm x 57mm (4 in x 4 in x 2.25 in) E-20A Dimensions: 140mm x 115mm x 38mm (5.5 in x 4.5 in x 1.5 in)
-Shipping Weights: E-10: 0.91 kg (2 lbs), E-20A: .75 kg (1.5 lbs)
-Standard E-10/E-20A Environment: -26deg C to 54deg C (-15deg F to 130deg F) with 5% to 95% non-condensing humidity
-E-10/E-20A-EWP Environment: -26deg C to 54deg C (-15deg F to 130deg F) with up to 100% condensing humidity
-Speaker Volume: Approximately 70db maximum @ 1m
-Ring Voltage: 25V AC RMS minimum
-CPC Disconnect Time: 300ms minimum
-REN: 0.8A
-Standard Connections: (1) 2-position terminal block
-EWP Connections: (2) gel-filled butt connectors
|
