Click to enlarge

Viking Hot-Line Vandal Resistant Phone Stainless Steel

Attractive, Vandal Resistant, Hot-Line Phone with Built-in Keypad

The K-1900-8 panel phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard (dumb) phone. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls.

The K-1900-8 housing consists of a heavy gauge stainless steel panel, a metal Touch Tone keypad, an armored cable, a heavy duty handset, and an all metal cradle. The K-1900-8 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory.

For outdoor or harsh environments, the K-1900-8-EWP is available with Enhanced Weather Protection (EWP). The EWP version includes faceplate, transmitter and receiver gaskets, hand soldered silicon sealed connections, gel-filled butt connectors, as well as a urethane potted circuit board with weather sealed, field-adjustable trim pots and DIP switches for easy on-site programming.

Applications
Catalog sales
Kiosks
Courtesy and customer service phones
Automated tellers (ATMs)
Hot-line
reservation phones
Security and emergency phones
Replaces leased ringdown circuits
Gate/entrance communication in noisy locations (diesel trucks, factory noise, etc.)

Features
Auto dials 1 (up to 32 digits) programmable speed dial number
Multi-number dialer mode adds 5 (up to 16 digits) speed dial numbers
Touch Tone or pulse dialing
Touch Tone keypad
Non-volatile memory (no batteries required)
Operates on analog PABX and key system extensions or analog Centrex and C.O. lines
Programmable 6 digit security code
Touch Tone programmable
Vandal resistant features: 1/8in thick stainless steel panel, armored cable, metal cradle and sealed metal keypad
Programmable pre-dial pause
Blocks fraudulent calls from hand held pocket dialers
Limited toll restriction in dumb phone mode
Hearing aid compatible amplified handset with sealed push button volume control
Optional Enhanced Weather Protection (EWP)

Specifications
Power: Telephone line powered (20V DC/18mA minimum)
Dimensions: Overall - 127mm x 254mm x 102mm (5in x 10in x 4in)
Operating Temperature: 0C to 32C (32F to 90F)
Humidity: Standard - 5% to 95% non-condensing EWP - Up to 100% condensing
Panel Material: .125 inch thick stainless steel
Handset Cable Length: Standard K-1900-8 - 86cm (34in) K-1900-8-EWP - 137cm (54in)
Mounting: Flush mount or surface mount with optional VE-5x10
Dial Speed: Touch Tone - Normal = 120ms on/off, Fast = 50ms on/off; Pulse - Normal = 10 pps, Fast = 20 pps
Connections: (2) gel-filled butt connectors